User`s manual

Graphic Operation Terminal F930GOT HPP Mode 4
4-2
4.2 DEVICE MONITOR
The ON/OFF status and the set value/current value of arbitrary devices in the PLC can be
monitored. In addition, the ON/OFF status can be forcedly set to ON/OFF and the set values/
current values can be changed.
4.2.1 Device monitor
Symbols such as X and Y can be displayed for monitoring.
Number of devices monitored and displayed on the screen
u
uu
u
Basic operation
Table 4.1:
Bit device Word device
4 devices/screen 2 devices/screen (1 device/screen for timer and counter)
[DEVICE MONITOR]
SET ON OFFDEV.
END [DEVICE MONITOR]
When "DEVICE MONITOR" is selected on the
HPP MODE screen, the DEVICE MONITOR
screen shown on the left is displayed.
Function keys are provided at the bottom of the
screen. Each function key is actuated when
touched.
DEVICE: Allows to specify the device No. to be
monitored.
ON/OFF: Turns ON/OFF forcedly the specified
device.
SET : Executes change of the current value/set
value.
The HPP MODE
screen is displayed.
DEVICE
Enter a
device
symbol.
Device symbol
Device No.
ENT
Monitor a
consecutive
device.
Move the cursor to a
device which has been
already registered.
M 100
0
When the DEVICE key is
pressed, the device symbol list is
displayed as shown on the right.
When a device symbol is
entered, the device No. list is
displayed as shown
on the right.
Paragraph 4.4
1 2 3
5 6 87
A B C D E
4
9
ENT
CLRF
Z V
T C D32D16
X Y M S
ENT
CLR