User`s manual

Additional Functions (V 2.20/3.00 or later) 15
15-1
15. Additional Functions (V 2.20/3.00 or later)
This section describes the functions added in V 2.20/3.00 or later.
15.1 Outline of additional functions
• Applicable versions and models
• Additional functions
The table below shows the additional functions.
Confirm also the version of the screen creation software compatible with each function.
*1 "GOTRE-PACK" stands for SW
¨
D5C-GOTRE-PACK (V).
"DU/WIN-E" stands for FX-PCS-DU/WIN-E.
*2 The product "SW2, Version A or later" can be connected to the Q Series PLC when "PLC
TYPE" is set to "A, QnA".
Table 15.1:
Model name Version V 2.20 Version V 3.00
F930GOT-BWD-E
Produced in April, 2000 or later
(Serial No.: 04**** or later)
Produced in June, 2000 or later
(Serial No.: 06**** or later)
Table 15.2:
O : Supported

: Not supported
Function
Applicable GOT
version
Screen creation software
version
*1
V2.20 V3.00 GOTRE-PACK DU/WIN
Connection to MELSEC Q Series PLC
Direct connection to CPU (RS-232C) and
connection to serial communication unit
(RS-422, RS-232C) are available.
üü
SW4 Version
50F
*2
V2.40
Connection to PLC manufactured by Siemens
Connection to S7-300/400 Series PLC is
available.
 ü
To be supported
in near future
V2.40
Connection to machine controller manufactured
by YASUKAWA ELECTRIC CORP.
 ü
SW4 Version
50F
To be supported
in near future
Two or more GOT units can be connected when
micro computer board is used.
 ü
SW1 Version
00AF
V2.20
Graphic Operation Terminal F930GOT