User`s manual

Graphic Operation Terminal F930GOT Additional Functions (in V.2.00 or later) 13
13-17
13.6.4 Setting the operation
This paragraph describes the operation performed when the triggers set in the previous para-
graph are established.
As the operation, a bit device can be turned ON/OFF or data can be written to word devices.
One type of operation can be selected for the triggers set in the previous paragraph.
1) Operation of bit device
- Momentary
While specified triggers are established, a specified bit device remains ON.
-Set
When specified triggers become established, a specified bit device turns ON.
Even if the specified triggers become released after the specified bit device turns ON, it
remains ON.
- Reset
When specified triggers become established, a specified bit device turns OFF.
Even if the specified triggers become released after the specified bit device turns OFF, it
remains OFF.
- Alternate
When specified triggers become established, the current status of a specified bit device
is inverted.
(If the specified bit is ON, it turns OFF. If it is OFF, it turns ON.)
Trigger
Operation
Established Established
ON
ONOFF OFFOFF
Trigger
Operation
Established Established
ONOFF
Trigger
Operation
Established Established
OFFON
Trigger
Operation
Established Established
ON OFFOFF