User`s manual

Graphic Operation Terminal F930GOT Additional Functions (in V.2.00 or later) 13
13-8
13.3 Connection of PLC manufactured by Allen-Bradley
When connecting the SLC500 Series PLC manufactured by Allen-Bradley, set the communica-
tion parameters and the RS-232C port as follows using an SLC500 Series peripheral tool.
13.3.1 Connection
Connect the SLC500 Series PLC manufactured by Allen-Bradley to the programming connec-
tor in the PLC.
• Applicable PLC
< SLC500 Series > < Connection status >
SLC5/03, SLC5/04 CPU PORT (RS-232C)
• System configuration
• Connect the SLC Series PLC to the GOT as shown below.
For the cable length and the detailed specifications of the SLC Series, refer to the instruc-
tion manual of the SLC500 Series.
< CPU PORT (RS-232C) > SLC 5103/5104
To CPU (programming connector)
RS232C
GOT
side
D-sub
(male),
9 pin
SLC
CPU
side
D-sub
(male),
9 pin
‚
ƒ
†
‡
…
„
•
ˆ
‰
Shell
NC
CD
RD(RXD)
SD(TXD)
DTR
SG
DSR
RTS
CTS

CD
RD(RXD)
SD(TXD)
DTR
SG
DSR
RTS
CTS
‚
ƒ
†
‡
…
„
•
ˆ
‰
5
4
3
2
1
9
8
7
6
5
4
3
2
1
9
8
7
6