User`s manual

Graphic Operation Terminal F930GOT Additional Functions (in V.2.00 or later) 13

13-2

13.2 Connection of bar code reader

13.2.1 Connection

* A bar code reader is connected to the RS-232C connector. Accordingly, the printout function

or the two-port interface function cannot be used together with a bar code reader.

If the F930GOT is connected to the PLC via RS-232C, the bar code reader connection func-

tion is not available.

13.2.2 Communication specifications

The F930GOT can be connected to a bar code reader which satisfies the communication

specifications and the communication format shown below.

• Communication specifications

• Communication format

Data : ASCII code

Header : None

End code : CR (0DH)

Communication port RS232C

Baud rate 9600 bps

Data length 8 bits

Stop bit length 1 bit

Parity Even

Data CR (0DH)

9: 

1:Unused

2:RD(RXD)

3:SD(TXD)

4:DTR

5:SG

6:DSR

7:RTS

8:CTS

• System configuration • Connection

F930GOT: RS-232C connector