User`s manual

Additional Functions (in V.2.00 or later) 13
13-1
13. Additional Functions (in V.2.00 or later)
This section describes the functions added in V.2.00 or later.
13.1 Outline of additional functions
• Applicable version
To use the additional functions, the following screen creation software is required.
SW
o
D5C-GOTR-PACK : V.G (manufactured in April, 1999)
FX-PCS-DU/WIN-E : V.2.30 or later
• Contents of additional functions
1) Connection of bar code reader
→
Paragraph 13.2
The ASCII code data from a bar code reader can be stored in word devices in the PLC by
way of the F930GOT.
2) Connection of the SLC500 Series PLC manufactured by Allen-Bradley
→
Paragraph 13.3
The CPU (RS-232C) in the SLC 500 Series PLC can be connected.
* When the connected PLC is set to RS-232C, a bar code reader cannot be connected at
the same time.
While the screen data is transferred from a personal computer or while output to a
printer is performed in the other mode in the GOT, communication with a bar code
reader is disabled.
3) Connection of the MELSEC-QnA Series PLC
→
Paragraph 13.4
CPU direct connection (RS-422) or computer link unit connection (RS-422/232C) is
available.
4) Additional key codes available in alarm history objects
→
Paragraph 13.5
5) Ten-key window display position can be specified.
→
Paragraph 13.6
6) Additional status monitoring function
→
Paragraph 13.7
Bit devices in the PLC can be set to ON/OFF, specified bit devices can be set to ON/OFF
at a constant cycle, and constants can be written.
7) Additional touch key and indicator figures
→
Paragraph 13.8
8) Additional shading patterns
→
Paragraph 13.9
Product model name Version Remarks
F930GOT-BWD-E V.2.00
Graphic Operation Terminal F930GOT