User`s manual

Graphic Operation Terminal F930GOT Creation of Display Screens (SW
o
oo
o
D5C-GOTRE-PACK) 12
12-10
12.6.2 Application example 2
In the example below, changeover of the base screen and screen changeover using touch
keys is combined.
Changeover of the base screen
Word device specifying the changeover destination: D0 (initial value)
It is registered as the common setting for all screens.
•When the ST. 1 key is pressed, screen No. 2 is dis-
played. When the ST. 2 key is pressed, the screen No.
3 is displayed.
Setting of screen No. 1
ST. 1 key : Fixed value = 2
ST. 2 key : Fixed value = 3
•When the sequence program shown below is executed
while screen No. 2 is displayed, the screen No. 10 or
20 is displayed by the base screen changeover func-
tion.
• Program example for application example 2
ST. 1 key
When a sequence program is executed,
screen No. 10 or 20 is displayed.
ST. 2
Screen No. 1
ST. 1
MONITOR
MONITOR
* MENU *
ST. 2 key
To screen
No. 3
Screen No. 2
PROCESSING
STATION 1 MONITOR
MOV K1 D0
MOV K10 D0
Interlock is required so that the screen is not
changed over to screen No. 10 or 20 while
screen No. 1 is displayed.
Initialization pulse
FX Series: M8002
A Series : M9038
MOV K20 D0
No. 1
Screen No. 10 is displayed
Screen No. 20 is displayed