User`s manual

Graphic Operation Terminal F930GOT Creation of Display Screen (SW
o
oo
o
D5C-GOTRE-PACK) 11
11-14
• Combination of touch keys
If a touch key on the alarm list is assigned with a key code from the table below, it will per-
form its respective operation, also shown in the table.
Key codes used for the alarm list display function
When a touch key to which "FFB8" (detailed information display function) is assigned, the
alarm message (comment window) or the base screen is changed over, and the detailed
information is displayed.
To display the detailed information, "Detail Display Destination" in "Alarm List Display Set-
ting" of the screen creation software should be preliminarily set to "Comment Window" or
"Base Screen".
• When "Comment Window" is selected
• Move the cursor to an alarm message to be displayed
in detail, and press the DETAIL key. Then, the detailed
display window is open as shown on the left.
• A comment in the comment list specified by "Detail Dis-
play No." in "Alarm List Display Setting"-"Detail Display
Setting" of the screen creation software is displayed.
• Changeover of the base screen
A screen specified by "Detail Display No." in "Alarm List Display Setting"-"Option" of the
screen creation software is displayed.
Key code Operation
FFB0 Displays the cursor.
FFB1 Deletes the cursor.
FFB2 Moves the cursor upward.
FFB3 Moves the cursor downward.
FFB8
Displays the detailed information of the alarm
selected by the cursor.
FFBB
Resets the alarm in a line in which the cursor is
located“
DETAILS
When this button is pressed, the
detailed display window is closed.