User`s manual

Graphic Operation Terminal F930GOT Creation of Display Screen (SW
o
oo
o
D5C-GOTRE-PACK) 11
11-12
• Combination of touch keys
If touch key is placed on an alarm history screen and assigned a key code from the table
below, it will perform its respective operation, also shown in the table.
Key codes used for the alarm history display function
When a touch key to which "FFB8" (detailed information display function) is assigned, the
alarm message (comment window) or the base screen is changed over, and the detailed
information is displayed.
To display the detailed information, "Detail Display Destination" in "Alarm History Common
Setting" of the screen creation software should be preliminarily set to "Comment Window"
or "Base Screen".
• When "Comment Window" is selected
•Move the cursor to an alarm message to be displayed in
detail, and press the DETAIL key. Then, the detailed
display window is open as shown on the left.
•A comment in the comment list specified by "Detail Dis-
play No." in "Alarm History Common Setting"-"Device
Monitor"-"Edit" of the screen creation software is dis-
played.
• Changeover of the base screen
A screen specified by "Detail Display No." in "Alarm History Common Setting"-"Device Mon-
itor"-"Edit" of the screen creation software is displayed.
Key code Operation
FFB0 Displays the cursor.
FFB1 Deletes the cursor.
FFB2 Moves the cursor upward.
FFB3 Moves the cursor downward.
FFB8
Displays the detailed information of the alarm
selected by the cursor.
DETAILS
When this button is pressed, the
detailed display window is closed.