User`s manual

Graphic Operation Terminal F930GOT Changeover of Display Screen (FX-PCS-DU/WIN-E) 10
10-6
10.3 Screen changeover by touch key
This paragraph describes screen changeover using a touch key.
When a touch key is used for screen changeover, the screen display is changed over to the
specified destination when the touch key becomes ON. Enter an arbitrary touch key to "Control
Input" in "Condition". Select "Direct" in "Destination Screen", and enter a desired screen No. to
"Screen No."
Set item Description
Control Input
(in GOT)
Available touch keys
Common setting for all screens: Touch keys Nos. 50 to 99
Setting for individual screen: Touch keys Nos. 0 to 49
Bit Device
Do not select "Bit Device". (Do not enter any bit device No.)
Screen No.
Enter the screen No. of a screen to be displayed next among user screens Nos. 0
to 499 and system screens Nos. 1001 to 1030.
50 keys in all