User`s manual

Graphic Operation Terminal F930GOT Creation of Display Screens (FX-PCS-DU/WIN-E) 9
9-58
9.5.10 Buzzer
The "Buzzer" object issues buzzer sounds in the GOT when a specified bit device in the PLC
becomes ON.
u
uu
u
Contents of setting
u
uu
u
Contents of operation
One Time: When a specified bit device becomes ON from OFF, a short buzzer sound is issued
once (in the same way as when a key is pressed).
Three Times: When a specified bit device becomes ON from OFF, a short buzzer sound is
issued three times (in the same way as when an error has occurred).
Continuous: When a specified bit device becomes ON from OFF, buzzer sound is issued con-
tinuously.
n
nn
n
Important point
• Sequence program
If the ON time of a specified bit device is extremely short (such as in a high-speed input or a
device converted into a pulse), the GOT may not recognize the ON status.
The GOT refers to the ON/OFF status in the PLC at every 200 to 300 ms. A bit device spec-
ified in the "Buzzer" object should remain ON for 300 ms or more.
Attribute Contents of setting
Bit Device Enter a bit device to be referred to.
Mode Select one among "One Time", "Three Times" and "Continuous".