User`s manual

Graphic Operation Terminal F930GOT Creation of Display Screens (FX-PCS-DU/WIN-E) 9
9-43
6) Label
Enter a text to be displayed inside the touch key.
Up to 20 full-width characters or 40 half-width characters can be displayed.
7) Key Type
• Select whether or not the area specified as the touch key is enclosed with a frame.
• Select "No frame" or select one among the following five frames.
8) Additional functions
The following functions can be assigned to a touchkey.
- Switch (Refer to Paragraph 9.5.2.)
- Increment (Refer to Paragraph 9.5.5.)
- Decrement (Refer to Paragraph 9.5.6.)
- Write Constant (Refer to Paragraph 9.5.4.)
- Send Data Bank (Refer to Paragraph 9.5.3.)
- Data Setting (Refer to Paragraph 9.5.7.)
- Change Screen (Refer to Paragraph 9.5.9.)
Frame
shape
No frame Shaded
Double frame
(keyboard)
Double frame
(trimming)
Double frame
(shaded)
Double frame
(bold)
ƒA•[ƒ•
•ã•¸
ƒA•[ƒ•
abc
ABC
abc
ƒA•[ƒ•
•ã•¸
ABC
ƒA•[ƒ•
•ã•¸
abc
ABC
123
ƒA•[ƒ•
•ã•¸
abc
123
When the second line is
blank and texts are
displayed in the first and
third lines respectively
When the first and
third lines are blank
and a text is
displayed in the
second line
When a text is
located in the center
<Display example:>
-In the case of 1 line -In the case of 2 lines -In the case of 3 lines
ƒA•[ƒ•
When a text is displayed in 1 line
abcdABCD1234
If a text is longer than the touch key, the text is extruded.
Two or more of these functions can be
set to a touch key.
Only one of these function can be set
to a touch key.
(The functions above can be com-
bined.)