User`s manual

Graphic Operation Terminal F930GOT Creation of Display Screens (FX-PCS-DU/WIN-E) 9
9-41
9.5.1 Touch Key
A specified area on the screen can be set as a touch key which functions as an operation key
when pressed.
The "Touch Key" object allows to specify an area which functions as a touch key. To each touch
key, functions offered by the objects "Switch", "Send Data Bank", "Write Constant", "Incre-
ment", "Decrement", "Data Setting" or "Change Screen" can be assigned.
u
uu
u
Contents of setting
1) Size
• The entire screen is divided into
"meshes" as shown on the left. The
touch key area can be specified in the
unit of mesh.
• The entire screen consists of 15 W x 4
H meshes. One mesh consists of 16 x
20 dots.
• Broken lines are not actually displayed
on the screen.
Attribute Contents of setting
Position Enter the X and Y coordinates in the unit of dot.
Size Enter the width (W) and the height (H) in the unit of dot.
Reverse On
To u c h
Set whether or not the touch key frame is changed over when pressed
(None/Key/Bit).
When "Bit" is selected, specify a bit device for changeover.
Trigger Enter a bit device which makes the touch key effective.
Key Code
Enter a 16-bit hexadecimal value.
It is used as a code when a character is entered or when a special operation
is performed.
Auto repeat and
Simul. press
Set the operation.
Label
Enter a text to be displayed inside the touch key. The character size can be
specified.
Label Color Enter the label color. (Initial value: Black)
Key Type Select the touch key frame shape.
Frame Color
Enter the display color and the background color. (Initial values: Black and
white)
For the background color, enter the color in the ON status and the color in
the OFF status respectively.
15 meshes (240 dots)
4 meshes
(80 dots)
Touch key