User`s manual

Graphic Operation Terminal F930GOT Introduction 1

1-2

System screens

• Monitor function

Device monitor

1) The ON/OFF status of each device and the set value and the current value of each timer,

counter and data register in the PLC can be monitored and changed.

2) Specified bit devices can be forced ON or OFF.

Unlike the monitor function described in the previous page, the screen data can be

edited by inputting a desired device No. from the keyboard.

• Other functions

Many other functions are built in.

1) A real-time clock is built in, so the current time can be set and displayed.

2) The GOT can function as an interface to enable data communication between the PLC

and a personal computer in which the relay ladder creation software is running. At this

time, the GOT screen can also be displayed.

3) The screen contrast can be adjusted, and the buzzer sound can be turned on or off.

Important point

Display screens can be created using the following software.

Screens for DU:

FX-PCS-DU/WIN-E (V.2.20 or later)

Screens for GOT-A900:

D5C-GOTRE-PACK (V.H or later) ("

" indicates a numeric not less than "1".)