Installation manual

2.2 Specifications of the Operating Terminals
Specifications
F920GOT-K / F930GOT-K 9
Item F920GOT-BBD5-K-E F930GOT-BBD-K-E
Supply voltage
5 V DC (±5%)
(supplied from PLC via the data cable)
24 V DC (+10% / –15%),
Ripple voltage 200 mV or less
Current
consumption
Backlight ON 220 mA @ 5 V DC 220 mA @ 24 V DC
Backlight OFF 180 mA @ 5 V DC 120 mA @ 24 V DC
Fuse — Build-in, irreplaceable
Allowable momentary power supply failure
time
—
5 ms or less
If less than 5 ms, the GOT will continue
operation. If 5 ms or more, the GOT will
shut down.
Backup of data
Clock data,
Alarm history,
Sampled data
—
By build-in FX
2NC-32BL lithium battery,
Life: approximately 3 years,
Guaranteed term: 1 year
Screens
Screens are stored in the build-in flash memory and are not deleted even in the case of
a cut down power supply and a low battery.
Display
Type STN monochrome liquid cristal (blue/white)
Size
60 mm x 30 mm
4 rows with 16 characters each
240 mm x 80 mm
5 rows with 30 characters each
Resolution 128 x 64 dots 320 x 240 dots
Dot pitch 0.47 mm x 0.47 mm
Life approximately 50,000 hours at a operating temperature of 25 쎷C
Backlight LED, white or red is selectable Cold cathode tube
Life of backlight —
50,000 hours or more at a operating tem-
perature of 25 쎷C
Guaranteed term: 1 year
Touch Keys — maximum 50 touch keys per screen
Size of touch keys — 15 x 4 dots
Number of screens
max. 500 user created screens
30 system screens (No. 1001 to 1030)
Key-pad
Overall number of key 26 28
Function keys 6 8
Ten-keys 12 (numbers 0 to 9, „-“ and „.“)
Other 8 (four keys for cursor movement and „SET“, „DEV“, „ESC“ and „ENT“ keys)
User memory Flash ROM 128 kB Flash ROM 256 kB
Interfaces
RS422 (COM 0) 1 port (9-pin D-sub, female) for communication with PLC
RS232C (COM1)
1 port (9-pin D-sub, male) for communication with PLC and connection of a personal
computer for data exchange
LED indicators — One green LED in each function key
Acustic indication With build-in buzzer
Weight 0.3 kg 0.6 kg