Installation manual

1 Introduction
This Installation Manual includes a brief summary of the main specifications of the graphic oper
-
ation terminals F920GOT-BBD5-K-E and F930GOT-BBD-K-E, which should be sufficient to
enable experienced users to install and configure the units. For further information on the opera
-
tion terminals please refer to the manuals of the GOT F900 series. These manuals can be
ordered or downloaded free of charge from the Mitsubishi website at "www.mitsubishi-automa
-
tion.com".
1.1 General Description
The graphic operation terminals (GOT) F920GOT-BBD5-K-E and F930GOT-BBD-K-E (or
F920GOT-K and F930GOT-K for short) are designed to be mounted in a panel or control cabi
-
net. They are equipped with a high-resolution graphical dispay and a key pad with function keys
and ten-keys for entering numeric values.
With the additional touch screen function of the F930GOT-K you can make inputs or control a
machine easily by a touch of your hand.
The GOTs also offer diagnostic and monitor functions such as the display of the current value of
PLC devices.
The screen creation software FX-PCS/DU-WIN-E (from version 2.7 onward) or GT-Designer
(from version 5.26C) makes it easy to create user defined screens tailored to your application.
The build-in serial interfaces (RS422 and RS232C) of the operation terminals not only allow the
connection to all types of MELSEC (Mitsubishi Electric) PLCs, but also to programmable logic
controllers from third party manufacturers.
1.2 Connections
F920GOT-K
쎲 Via the RS422 port:
– direct connection to an PLC of the FX family (also to the interface adapters FX
1N-422-BD
and FX
2N-422-BD) and to CPU modules of the MELSEC A and QnA series
쎲
Via the RS232C-port:
– direct connection to a CPU module of the MELSEC System Q
F930GOT-K
쎲
Via the RS422 port:
– Connection to the MELSEC FX range of PLCs (either direct or with an interface adapter
FX
1N-422-BD or FX2N-422-BD)
– Connection to the MELSEC A and QnA series (either direct or via an interface module)
– Connection to positioning modules FX
2N-10/20GM
– Connection to MITSUBISHI frequency converters of the S500, E500 or A500 series
– Connection to PLCs from third party manufacturers
쎲
Via the RS232C-port:
– direct connection to a CPU module of the MELSEC System Q
– Connection to a PLC of the MELSEC FX family via interface adapter FX첸-232-BD or
the active data interface module FX
0N-232ADP
– Connection to an interface module of the MELSEC A and QnA series, or the MELSEC
System Q
– Connection of a printer equipped with a serial RS232C port
– Connection of a bar-code reader
– Connection to PLCs from third party manufacturers
Introduction
F920GOT-K / F930GOT-K 7