Installation manual

Connection to the interface modules AJ71C21-S1, AJ71UC24, AJ71UC24-S2,
AJ71QC24N-R2, and AJ71QC24N
Connection to the interface modules A1SJ71UC24-R2, A1SJ71C24-PRF,
A1SJ71UC24-R2-S2, A1SJ71QC24(-R2), and QJ71C24(-R2)
Connection to a CPU of the MELSEC System Q
Connection to PLCs of third party manufacturers
For further information on the connection of the operation terminals to logic controllers of third
party manufacturers or e.g. frequency converters from Mitsubishi Electric please refer to the
hardware manual of the GOT F900 series (connection).
Wiring
20 MITSUBISHI ELECTRIC
F930GOT-K side
Cable Length PLC side
Port Connector
RS232C 9-pin D-SUB, female QC30R2 3.0 m 6-pin MINI-DIN
F930GOT-K side
Cable Length
PLC side
(interface module)
Port Connector
RS232C 9-pin D-SUB, male PIN Prepared by the user
max.
15 m
PIN Signal
25-pin
D-SUB,
male
Connect the shield at the
PLC side only
Hood
2 2 SD (TXD)
3 3 RD (RXD)
7 4 RS (RTS)
8 5 CS (CTS)
6 20 ER (DTR)
5 7 SG (GND)
4 6 DR (DSR)
51
96
1
13
14
25
F930GOT-K side
Cable Length
PLC side
(interface module)
Port Connector
RS232C 9-pin D-SUB, female PIN Prepared by the user
max.
15 m
PIN Signal
9-pin D-SUB,
male
Connect the shield at the
PLC side only
Hood
2 3 SD (TXD)
3 2 RD (RXD)
4 6 DR (DSR)
5 5 SG (GND)
6 4 ER (DTR)
7 7 RS (RTS)
8 8 CS (CTS)
51
96
1
5
6
9