Installation manual

5.1.2 F930GOT-BBD-K-E
Connection to a CPU of the FX0, FX0S,FX0N,FX1S,FX1N,FX2N or FX2NC series, or the
interface adapters FX
1N-422-BD and FX2N-422-BD:
Connection to an active data interface module FX
0N-232ADP
A communication adapter FX
1N-CNV-BD or FX2N-CNV-BD is required in addition.
Connection to an interface adapter FX
1N-232-BD or FX2N-232-BD
Wiring
18 MITSUBISHI ELECTRIC
F930GOT-K side
Cable Length PLC-Side
Port Connector
RS422 9-pin D-SUB, male FX-50DU-CAB0/EN 3.0 m 8-pin MINI-DIN
F930GOT-K side
Cable Length
PLC side
(FX
0N-232ADP)
Port Connector
RS232C 9-pin D-SUB, female PIN Prepared by the user
max.
15 m
PIN 25-pin D-SUB, male
Shielding 1
22
33
85
46
57
620
51
96
113
14 25
F930GOT-K side
Cable Length
PLC side
(FX
-232-BD)
Port Connector
RS232C 9-pin D-SUB, female FX-232-CAB1 3.0 m 9-pin D-SUB, female