Installation manual

5 Wiring
5.1 Connection with the PLC
5.1.1 F920GOT-BBD5-K-E
E
CAUTION:
Do not connect a PLC to the RS422 port and at the same time a second PLC to the
RS232C port of the GOT.
Doing so can damage the GOT or the PLCs.
Connection to a CPU of the FX0, FX0S,FX0N,FX1S,FX1N,FX2N or FX2NC series, or the
interface adapters FX
1N-422-BD and FX2N-422-BD:
Connection to the programming port of a A or QnA series CPU
Wiring
16 MITSUBISHI ELECTRIC
F920GOT-K side
Cable Length PLC side
Port Connector
RS422 9-pin D-SUB, male FX-50DU-CAB0 3.0 m 8-pin MINI-DIN
F920GOT-K side
Cable Length PLC side
Port Connector
RS422 9-pin D-SUB, male PIN
Prepared by the user
(cross section 0.08 mm
2
or more)
max.
3.0 m
PIN 25-pin D-SUB, male
12
23
34
420
57
615
716
817
912
8
21
113
14 25
15
69