Installation manual

3.2 F930GOT-BBD-K-E
Description of the GOTs
12 MITSUBISHI ELECTRIC
Number Item Description
쐃 Display
Monochrome liquid cristal display (LCD) with touch-sensitive surface.
That means that inputs can be made by touching the screen.
 Slots for mounting brackets
Six mounting brackets (two on each side and one on top and one on top
and bottom) are used to press the GOT from the backside of the panel
against the panel cutout.

Function keys
with LEDs
F1 to F4 No wiring is required for the function keys. They can be used in the pro-
gram as normal inputs. The function of each key (push button or switch,
set or reset, screen changing etc.) is specified in the software
FX-PCS/DU-WIN-E or GT-Designer.
쐏 F5 to F8
 Cursor keys
„왖“
„왗“ „왘“
„왔“
These keys move the cursor on a screen.
„SET“ This key is used to display the cursor.
„ESC“ Use this key to cancel an input operation
„ENT“ After pressing this key an input numeric value is taken over.
„DEV“ For entering devices on the system screen „DEVICE MONITOR“
 Ten-keys
The keys 0 to 9, „-“ and „폷“ are used to enter numeric values. Other char
-
acters are entered on the touch screen.
 Power supply terminals The power supply (24 V DC) is connected to these screw terminals (M3).
 RS422 port
쎲
For connection to a PLC when the RS422 interface is used
쎲
Connection to another operation terminal of the GOT series
 RS232C port
쎲
Communication port for data transfer from a personal computer
쎲
For connection to a PLC when the RS232C interface is used
쎲
Connection to another GOT, a printer, or a bar-code reader
쐅 Battery compartment
A battery FX
2NC-32BL for backing up the clock and alarm data is
mounted in this battery holder.
7
4
1
0
89
5
2
-
6
3
.
ESC
ENT
DEV
SET
COM0
RS-422
COM1
RS-232C
+
24VDC
-














쐅
