Installation manual

3 Description of the GOTs
3.1 F920GOT-BBD5-K-E
Description of the GOTs
F920GOT-K / F930GOT-K 11
7
F1
F2
F3
F4
F5
F6
4
1
0
89
5
2
-
6
3
.
ESC
ENT
SET
DEV
COM0 RS-422 COM1 RS-232C












Number Item Description
쐃 Display Monochrome liquid cristal display (LCD)
 Slots for mounting brackets
Four mounting brackets (two on each side) are used to press the GOT
from the backside of the panel against the panel-cutout.
 Function keys
No wiring is required for the function keys. They can be used in the pro
-
gram as normal inputs. The function of each key (push button or switch,
set or reset, screen changing etc.) is specified in the software
FX-PCS/DU-WIN-E or GT-Designer.
 Cursor keys
„왖“
„왗“ „왘“
„왔“
These keys move the cursor on a screen.
„SET“ This key is used to display the cursor.
„ESC“
쎲
To cancel an input operation
쎲
To exit a system screen
„ENT“ After pressing this key an input numeric value is taken over.
„DEV“
쎲
Change over from user screens to system screens
쎲
For entering devices on the system screen „DEVICE MONITOR“
 Ten-keys
The keys 0 to 9, „-“ and „폷“ are used to enter numeric values. The key „폷“
changes the data format of the value between decimal and hexadecimal.
The hexadecimal values „A“, „B“, „C“ … and „F“ are entered with the keys
„1“, „2“, „3“ ... and „6“ respectively.
 RS232C port
쎲
Communication port for data transfer from a personal computer
쎲
Serial port for connection to a PLC of the MELSEC System Q
 RS422 port Serial port for connection to a A, QnA, or FX series PLC