Specifications

6G7 ENGINE – Rocker Arms and Camshaft <GDI>
11B-11-5
PWEE9520
E
Nov. 1995Mitsubishi Motors Corporation
(6) Remove the lash adjuster from the container. Then,
push down the steel ball gently and push the plunger
to eliminate diesel fuel from the pressure chamber.
Caution
Make sure the oil hole in the side of the body
is pointing toward container A. Do not point the
oil hole at yourself or other people.
(7) Place the lash adjuster in container C. Then, gently
push down the internal steel ball using special tool
MD998442.
Caution
Do not use container C for cleaning. If cleaning
is performed in container C, foreign matter could
enter the pressure chamber when chamber is filled
with diesel fuel.
(8) Stand the lash adjuster with its plunger at the top,
then push the plunger downward firmly until it moves
through its greatest possible stroke. Return the
plunger slowly, then release the steel ball and allow
the pressure chamber to fill with diesel fuel.
(9) Remove the lash adjuster from the container, then
stand the lash adjuster with its plunger at the top.
Push the plunger firmly and check that it does not
move. Also, check that the lash adjuster’s height
matches that of a new lash adjuster.
NOTE
If lash adjuster contracts, perform the operations (7)
through (9) again to fill it with diesel fuel completely.
Replace the lash adjuster if it still contracts after
performing these steps.
(10)Stand the lash adjuster upright to prevent diesel fuel
from spilling out. Do not allow the lash adjuster to
become contaminated by dirt or other foreign matter.
Fit the lash adjuster onto the engine as soon as
possible.
PWEE9061-I
E
Aug. 2001Mitsubishi Motors Corporation Added
6EN1708
MD998442
Diesel fuel
6EN1709
MD998442
Diesel fuel
6EN1710
MD998442
Diesel fuel
6EN1711