Specifications

6G7 ENGINE – Rocker Arms and Camshaft
11B-10-8
PWEE9520
E
Nov. 1995Mitsubishi Motors Corporation
(4) Remove the lash adjuster from the container. Then,
push down the steel ball gently and push the plunger
to eliminate diesel fuel from the pressure chamber.
(5) Place the lash adjuster in container B. Then, gently
push down the internal steel ball using special tool
MD998442 and move the plunger through 5 to 10
strokes until it slides smoothly. This operation will clean
the lash adjuster’s pressure chamber.
Caution
The steel ball spring is extremely weak, so the
lash adjuster’s functionality may be lost if the air
bleed wire is pushed in hard.
(6) Remove the lash adjuster from the container. Then,
push down the steel ball gently and push the plunger
to eliminate diesel fuel from the pressure chamber.
(7) Place the lash adjuster in container C. Then, gently
push down the internal steel ball using special tool
MD998442.
Caution
Do not use container C for cleaning. If cleaning
is performed in container C, foreign matter could
enter the pressure chamber when chamber is filled
with diesel fuel.
(8) Stand the lash adjuster with its plunger at the top,
then push the plunger downward firmly until it moves
through its greatest possible stroke. Return the plunger
slowly, then release the steel ball and allow the
pressure chamber to fill with diesel fuel.
PWEE9061-I
E
Aug. 2001Mitsubishi Motors Corporation Added
Wire or MD998442
Diesel fuel
Wire or MD998442
Diesel fuel
Wire or MD998442
Diesel fuel
Wire or MD998442
Diesel fuel
Wire or MD998442
Diesel fuel