Specifications
Table Of Contents
- 11B ENGINE <6G7 - From 2002>
- GENERAL INFORMATION
- 1. SPECIFICATIONS
- 2. SPECIAL TOOLS
- 3. ALTERNATOR
- 4. CONTROL AND EGR SYSTEM
- 5. INTAKE AND IGNITION SYSTEM
- 6. TIMING BELT
- 7. WATER PIPE AND WATER HOSE
- 8. FUEL SYSTEM
- 9. EXHAUST MANIFOLD
- 10. ROCKER ARMS AND CAMSHAFT
- 11. ROCKER ARMS AND CAMSHAFT
- 12. CYLINDER HEAD AND VALVES
- 13. OIL PAN AND OIL PUMP
- 14. PISTON AND CONNECTING ROD
- 15. CRANKSHAFT, FLYWHEEL AND DRIVE PLATE
- Service bulletins
6G7 ENGINE – Specifications
11B-1-6
Item Nm
EGR pipe flare nut 18"2
Vacuum pipe and hose bolt 10"2
Vacuum pipe and hose bolt 10"2
Solenoid valve bolt 9"1
Intake and ignition system
Air intake fitting bolt 18"2
Air intake plenum bolt, nut <Except 6G75> 18"2
Air intake plenum bolt (M6) <6G75> 9"1
Air intake plenum bolt (M8) <6G75> 18"2
Air intake plenum nut 9"1
Air intake plenum stay bolt (M8) 18"2
Air intake plenum stay bolt (M10) 36"6
Boost sensor bolt 5"1
Bracket bolt 24"3
Center cover bolt 3.0"0.5
Distributor nut 14"1
Engine hanger bolt 17"2
Ignition coil assembly bolt <12-valve> 24"5
Ignition coil assembly bolt <24-valve for L200> 24"5
Ignition coil assembly bolt <24-valve except for L200> 11"1
Ignition coil bolt <GDI and 6G75> 10"2
Ignition failure sensor bolt 5"1
Intake manifold nut 22"1
MDP sensor bolt 5"1
Power transistor bolt 18"2
Spark plug 25"5
Throttle body bolt 12"1
Throttle body stay bolt 18"2
Water outlet fitting bracket bolt 14"1
Timing belt
Alternator stay bolt 25"4
Auto tensioner bolt 23"3
Cam position sensor bolt 11"1
Cam position sensor support bolt 14"1
Cam position sensing cylinder bolt 22"4
Camshaft sprocket bolt 88"10
Crank angle sensor bolt 8.5"0.5
Idler pulley bolt 44"5
Tensioner arm bolt 23"3
Tensioner pulley bolt 48"6
PWEE9061-K
E
Apr. 2003Mitsubishi Motors Corporation Revised