Motors Automobile Parts User's Manual

11A-6-2
6A1 ENGINE (E-W) -
Ignition System
REMOVAL AND INSTALLATION <MIVEC>
1
2
3
25 Nm
1.0 Nm
Removal steps
1. Spark plug cable
2. Ignition coil
3. Spark plug
6AE0151
Alignment mark
INSTALLATION SERVICE POINT
+
A
G
DISTRIBUTOR INSTALLATION
(1) Turn the crankshaft clockwise to bring the No. 1 cylinder
piston to the compression stroke top dead center.
(2) Align the mark on the distributor housing with the mark
on the coupling.
(3) Install the distributor while aligning the coupling key with
the keyway in the camshaft end.
K
Mitsubishi Motors Corporation Feb. 1997 PWEE9622