Specifications

4M41 ENGINE -
Piston and Connecting Rod
11B-23-12
4. CONNECTING ROD
(1) Fit the connecting rod bush
13
and piston pin
10
in the
connecting rod
15
.
(2) Measure the bend
A
and twist
B
of the connecting rod
15
. If either reading exceeds the specified limit, replace
the connecting rod.
C
: Connecting rod aligner (measuring device)
Limits:
Bend 0.05 mm
Twist 0.1 mm
Caution
1. Attach the connecting rod 15 to the connecting
rod aligner C with the upper and lower connecting
rod bearing shells installed in place.
2. Tighten the connecting rod cap nut to a torque
of 49
±
5 Nm.
PWEE9409-D
E
Feb. 2000Mitsubishi Motors Corporation Added
10
C
10
C
B
100 mm
A
100 mm