Specifications

4M41 ENGINE -
Oil Pump
11B-20-2
INSPECTION
OIL PUMP
(1) Shaft to Oil Pump Case and Cover Clearances
In either case, if the measurement exceeds the specified
service limit, replace oil pump assembly.
Standard value: 0.03 - 0.05 mm
Limit: 0.15 mm
(2) Difference between Gear Height and Oil Pump Case
Depth
If the difference exceeds the specified service limit, replace
defective part.
Standard value: 0.05 - 0.10 mm
Limit: 0.15 mm
(3) Gear Tooth Crest-to-Oil Case Clearance
If the clearance exceeds the specified service limit, replace
defective part.
Standard value: 0.15 - 0.26 mm
Limit: 0.27 mm
PWEE9409-D
E
Feb. 2000Mitsubishi Motors Corporation Added
11
10
15
11
15
*3
11
15
*3