Specifications

4M41 ENGINE -
Injection Pump Assembly
11B-12-1
12. INJECTION PUMP ASSEMBLY
REMOVAL AND INSTALLATION
2
5
6
1
7
25
±
2Nm
3
4
11
8
9
10
16
12
14
13
15
17
18
20
18
±
2Nm
19
Removal steps
1. Injection pump cover B
2. Injection pump cover A
3. Rubber spacer
4. Rubber spacer
5. Harness
6. Harness
7. Harness
8. Harness
9. Harness
10. Fuel return hose
11. Fuel leak-off hose
12. Fuel suction hose
A
A
""
B
A 13. Injection pipe
14. Bolt
15. Pump stay
16. Pump stay
"
A
A 17. Injection pump assembly
18. O-ring
19. Rubber spacer
20. Stay
Caution
1. Fuel is highly flammable. Keep it away from flames and sources of heat.
2. Be sure to wipe up spilt fuel completely. It could catch fire.
3. Have the injection pump assembly 17 serviced at an appropriate Zexel service station.
4. Dust particles entering the injection pump assembly 17 can seriously affect the engine
performance. To prevent it, fully cover the openings left after the removal of parts such as
pipes and hoses.
5. Before installing the injection pipe 13, check to ensure that the pipe seating surface is free
from any damage and unevenness.
PWEE9409-D
E
Feb. 2000Mitsubishi Motors Corporation Added