Service manual
Table Of Contents
3. Starter disassembly and reassembly
13
16
15
14
10
8
1-Switch 10-Gear
2-Rear
bracket
11-Spring set
3-Brush
holder
12-Lever
4-Yoke
13-Pinion set
5-Armature
14-Pinion shaft
6-Ball bea(ing
15-0il
seal
7-8all bearing
16-8all bearing
a-Cover set
17-Front
bracket
9-Center
bracket
(The parts are numbered in the sequence
of
removal for disassembly.
To
reassemble, follow the reverse
of
disassembly procedure.)
(1) Loosen the
nut
on the switch terminal (M), and
remove the connector. Remove the switch by pull-
ing the screws (2 pcs).
-78-
(2) Pull the through bolts (2 pcs), remove the brush
holder screws (2 pcs) and remove the rear bracket.
(NOTE)
Take care
not
to drop the washers which are
used
in
the rear bracket.