Service manual
Table Of Contents
(17) Install the rocker case.
(18) Install the water pump assembly
as
follows:
(a) Install water pump assembly.
(b) Install bypass hose and oil pipe.
(19) Install the timing gear
case
(1) to the front plate
properly.
Use
copper packing for bolts (2) to
prevent oil leakage.
(20) Install the water pump pulley and crankshaft
as
follows:
(a)
Drive
in
water pump pulley (1) and crankshaft
pulley (2) by using installers (A) and (B).
(b) After driving in the crankshaft pulley, install
washer and tighten nut. Then bend the lock
washer to lock the nut.
(21) Install the alternator.
(22) Install the
fan
belt
as
follows:
(a) Attach
fan
belt to the pulley.
(b) Adjust the
fan
belt tension
in
such a
way
to
have a slack
of
12
mm (1/2 in.)
(23) Install the starting motor.
(24) Install the oil filter.
-48-