Service manual

(10) Disconnect the water pump bypass hose and oil
pipe. To disconnect bypass hose, displace thermo-
stat elbow and water pump clamp.
(I 1) Remove the water pump as follows:
(a) Loosen attaching bolts (1).
(b) Remove water pump assembly (2).
(12) Remove the rocker shaft assembly
as follows:
(a) Loosen union nut (1).
(b) Loosen short bolts (2) and long bolts (3).
(c) Remove rocker shaft assembly (4).
(d) Remove oil pipe (5) and
"0" rings (2 pcs - to
be replaced with new ones).
(e) Remove
valve push rods and valve caps.
(f) Remove intake manifold.
(13) Remove the cylinder head assembly
as follows:
(a) Loosen cylinder head bolts (1).
(b) Remove cylinder head and gasket.
-10-