Specifications

24 2. TV Menus
Picture, continued
Perfect
(PerfectOomor, 842 Series)
PerfectOomor Smiders Adjusts the saturation (intensity) of six colors for the current image source.
PerfecTint Smiders Adjusts six hues for the current image source.
Using PerfectOomor:
Highlight the Perfect icon and press ENTERto display the PerfectColor menu. Settings are retained independently
for each TV input.
Using PerfecTint:
To switch between PerfectColor TM and PerfecTint TM adjustments, highlight PerfectOomoriPerfecTint and press _( _.
Press _ V to move from one color bar to the next.
Press 4 1_to change settings.
Press CANCELto restore default settings.
Press MENUto return to the main menu.
>
Picture > Advanced allows you to save highly customized picture adjust-
ments for each input. Mitsubishi recommends these adjustments be
made onmyby a trained professionam installer,
1, Press MENU° Under Picture, highlight the
Advanced icon and press ENTER.
2, With Picture Mode (the first option) highlighted,
press ENTERto change from blank (undefined) to
ADVl (daytime settings) or ADV2 (nighttime settings).
3, Use A _' to highlight an option you wish to change and
press ENTERto see the adjustment display'.
4, Press _( )_ to change settings.
5, Use _, V to navigate to additional options and press
)_ to change settings.
6, Press MENUto return to the Picture > Advanced
menu and save the adjustments for the current
input. Press EXITto close the menu.
Saving Custom 3D Settings
This menu can be used to create a custom Picture
Mode for viewing 3D content. Mitsubishi recommends
saving 3D settings under the name ADVl and 2D set-
tings under the name ADV2.
To create a custom 3D picture mode:
The TV must be receiving a 3D signal
One of the TV's 3D Source Formats must be
selected
You must be wearing 3D glasses matched to the
emitter in use.
Locking Custom Picture Mode Settings
842 Series, Once set up, you can protect custom
Picture Mode settings with a pass code. With the
Picture > Advanced menu displayed, highlight the
Picture Mode name and press keys
Once locked, the name of each Picture Mode changes:
ADVl is locked as mSFDay/3D
ADV2 is locked as mSFNight/2D
Use the same key sequence to unlock the settings and
make changes.
To Use a Custom Picture Mode at a Later Time
Press VIDEOand use AkV to find the Picture Mode
option. Press _( _ to select the desired mode.
Press MENUand go to Picture > Video > Picture
Mode and select the desired mode.
To Return to the Defaumt Vamues for Advanced
Display the Picture > Advanced menu and:
1, Highlight the name of the Advanced mode to change.
2, Highlight RESET Pic Mode and press ENTER.You
must perform the reset separately for both ADVl
and ADV2.
For assistance ca((1(800) 332-2119