Specifications

12 1. Additional TV Features
Specialized TV Connections
Photos and Motion Video as Composite
Video
Connect the camera to the TV using a composite video
cabBe and controB the slide show or movie through the
camera. The display resoBution will be standard-defini-
tion (480i).
Refer to the owner's manuaB suppBied with the
camera for instructions needed for this setup.
Set the camera's output signaBtype to NTSC and
put the camera into playback mode.
With the camera still turned on, connect your digital
camera's composite video cabBe (usually yellow) to
the TV's Y composite video jack. To hear audio,
connect the camera's audio output cabBeto the
audio L jack.
Using the TV with an Audio-Orfly Device
To use the TV speakers to listen to an audio device
such as an MP3 or CD player with analog output, follow
these steps.
3, Insert an unused RCA-style connector into the
Y composite video jack. The presence of this con-
nector activates the TV's auto-detection.
4,
When the TV detects the video connector, it will
display the New Device Found screen. Name the
new input CD/Audio or MP3 Pmayer.
Connect left (white) and right (red) audio cables
from AUDIO OUT on the device to L and R on the TV.
Keep the connector in the Y jack while using the
audio-only device.
TV jack panel
Camera connection using a composite video cable
4, When the New Device Found screen displays,
assign the name Camcorder.
5, Press _to close the New Device Found
screen.
If viewing photos, control the slideshow from the
camera. Advance through the images manually or
check if the camera can advance automatically.
Audio
cables
For assistance call 1(800) 332-2119