Product manual

47
352),%860'3#&RPPXQLFDWLRQV#,QWHUIDFH#0#+$7968948334
to see the System menu
with the added Drive
continued
0, 1 & 2 are
reserved
(always 00)
Enter the Tag No's in Hex
They are entered in pairs
i.e. 3 & 4, 5 & 6 etc.
Note that leading zeros
are omitted in the menu
thus the entry for 4 is actually
`0F' and not `F' as shown, e.g.
Click on the OK button
3 & 4 = 01 0F = 271
5 & 6 = 01 0D = 269
7 & 8 = 01 10 = 272
9 & 10 = 00 FF = 255
Click on DRIVES to repeat the process
and add another Drive to the System
Alternative view of menu below
taken from another configuration tool
Click on the OK button
Figure 9 Typical Configuration Tool Procedure