Specifications

NOTE: PLEASE READ THE TERMS OF THIS LIMITED WARRANTY CAREFULLY PRIOR TO
INSTALLATION AND START-UP OF YOUR NEW MITSUBISHI UNINTERRUPTIBLE POWER
SUPPLY SYSTEM. FAILURE TO FOLLOW THESE PROCEDURES MAY VOID YOUR LIMITED
WARRANTY!
MITSUBISHI ELECTRIC POWER PRODUCTS, INC.
UNINTERRUPTIBLE POWER SUPPLYSYSTEM
(2033A/2033C/2033D/9700/9800ASERIES)
LIMITED WARRANTY POLICY AND PROCEDURES
1. LIMITED WARRANTY: MITSUBISHI ELECTRIC POWER PRODUCTS, INC. (“MEPPI”) warrants to the original end
user that the 2033A/2033C/2033D/9700/9800A series Uninterruptible Power Supply Unit sold by MEPPI (the “Product”)
shall befree from defects in material and workmanship under normal use and service for a period of twentyfour(24) months
from the dateof installation or thirty (30) months from the date of shipment of the Product,whichever comes first, the original
end user (the “Warranty Period”). If MEPPI receives notice of any defects during the Warranty Period, MEPPI shall, at its
option, repair or replace any defectiveparts, subject tothelimitations and procedures described below.
A. LIMITATIONS.This Limited Warranty shall cover the Product onlyifallof the following conditions have beenmet:
(1) If temporary on-site storage of the Product was required before installation, all prescribed storage requirements as set
forth in MEPPI’s published storage guidelines shall have been strictly followed.
(2) MEPPI’s UPS Divisions Service Department or a MEPPI Authorized Service Organization shall have inspected the
installation site to determine correct application conditions and to perform any required inspections, calibrations and
startup of theProduct. Contact MEPPI at thenumber listed below to schedulestartup of theProduct.
(3) This limited warranty does not include travel and related costs for Products installed outside the United States. Consult
your local MEPPIrepresentative for terms and conditions.
B. EXCLUSIONS.ThisLimited Warranty does not cover:
(1) System batteries/battery plant and all other peripheral products and accessories not manufactured by MEPPI (including
components or software) or the installation, operation, maintenance or service of such accessories. These items may
be separately warranted by the manufacturer of the item in question.
(2)Any Product whose serial number has beenaltered defaced or removed.
(3)Any Product which has been damaged during shipment.
(4) Product defects caused by installation, start-up, wiring, modification, alteration, repair, service or parts replacement
except by MEPPI or an authorized MEPPI service representative. Contact MEPPI at the number below for a list of
authorized service providers in your area.
(5) Product defects caused by inadequate maintenance, misuse, physical abuse of the Product, accident, excessive stress
or operationof theProduct under abnormal environmental conditions or contrary to the Product’s operatinginstructions.
(6) Product defects caused by failure to follow the operational specifications or the handling and operational procedures
prescribed inthe Product Owner’s Manual.
(7) Service, repair or replacement of parts made necessary by any cause beyond MEPPI’s control,including, but not limited
to, fire, theft, lightning, acts of God, negligence, accident, excessive physical or electrical stress or operation under
abnormal environmental conditions.
(8) Products which have been decommissioned and/or relocated from the original installation site.