Specifications

-50-
5
5
10
4
7
6
A
J
Current time display
Timer Hold/Resume display
7 11
5. Other function4. Time setting
8
59
1
H
Key lock
Press the [MINUTE] button three times consecutively,
the word “KEY LOCK” will displayed .
At this time, only [ON-OFF] button is valid.
This function purpose is protect from mischief of child etc.
To cancel the key lock function, Please press [MINUTE]
button three times consecutively again.
Test run
Press the [TEST] button two times consecutively.
The unit will run and finished automatically after two hours.
Clock setting
Press the [CLOCK] key one time will activate set clock
mode.
Press the [CLOCK] key again will disable set clock
mode.
Under set clock mode, the real time clock and present day
setting can be changed by pressing [DAY] button ,
[HOUR] button or [MINUTE] button .
Caution:
[CLOCK] key is not allowed to be pushed with the thing of
sharp tip.
7-Days timer setting
There are two buttons for timer. One is [ON TIMER] ,
another is
[OFF TIMER] .
Press the button one time will activate set timer mode.
Press the same button again will disable set timer mode.
Under set timer mode, the 7-days timer setting can be
changed by pressing [DAY] button , [HOUR] button or
[MINUTE] button .
Day setting
During set clock mode or set timer mode, press the [DAY]
button will change the day setting.
Hour setting
During set clock mode or set timer mode, press the [HOUR]
button will change the hour setting.
Minute setting
During set clock mode or set timer mode, press the
[MINUTE] button will change the minute setting.
Timer Hold / Resume setting
If 7-days timer is set, then the word “Timer Active” is
displayed .
To clear all the timers setting, press and hold the
[HOLD]
button until the word “Timer Active” is not displayed.
To resume the timer setting after timers have been held,
press and hold the
[HOLD] button until the word “Timer
Active” is
displayed.