Specifications

Frequently-used functions Changing device values <Device test>
3 - 16
NOTE Installing the display unit allows the forced ON/OFF of X/Y device with the operation of the display
unit.
Operating procedure
The following is an example of operating the forced ON/OFF of X7.
앫 Select function selection screen, then CPU MON/TEST, and then click the  button.
앫 Select FORCED ON/OFF, and then click the  button.
앫 Select SET ON/OFF, and then click the OK button.
앫 Select X/Y using  or .
앫 Move the cursor position using  or , and increase/decrease the value for each digit one
number at a time to specify the device number using  or .
앫 Move the cursor position using  or , and switch ON/OFF using  or , and then click the
OK button.