Specifications

Using programmable controllers Programming
2 - 18
2.6.6 Converting a program
Define the contents of the entered ladder block.
Operating procedure
 Select Compile  Build.
 Perform the conversion to align entered ladders. When completed, the gray display turns to white.
The programming is completed.
Fig. 2-26:
Select Compile, then Build
000016a
Fig. 2-27:
Before conversion: gray display
000017a
Fig. 2-28:
After conversion: white display
000018a
NOTE Lines can also be edited using the following short-cut keys.
The ladder is left-aligned.
Editing Toolbar Short-cut key
Drawing lines [F10]
Inputting vertical lines
[Shift] + [F9]
[Ctrl] + []/[Ctrl] + []
Inputting horizontal lines
[F9]
[Ctrl] + []/[Ctrl] + []
Inputting horizontal lines continually —
[Ctrl] + [Shift] + []/
[Ctrl] + [Shift] + []