Specifications

Using programmable controllers System configuration
2 - 2
2.2 System configuration
2.2.1 System configuration example
The following system configuration is explained as an example.
Inputs and outputs are configured as switches and lamps respectively.
LS30001
Fig. 2-2: Example of a system configuration
NOTE Wires to the power supply module and the power of the external I/O devices are omitted.
No. Name Model Description

Power supply module L61P Supplies power to modules such as CPU module.

CPU module L02CPU
Integrates the control of the programmable control-
ler.

END cover L6EC
Supplied with the CPU module. Be sure to connect an
END cover on the right of the terminal module.

DIN rail
(IEC 60715)
앫 TH35-7.5Fe
앫 TH35-7.5Al
앫 TH35-15Fe
The programmable controller system is secured by
attaching it to the DIN rail.

DIN rail stopper —
Use DIN rail stoppers that can be attached to the DIN
rails.

Connection cable
(USB cable)
MR-J3USBCBL3M
(USB A type - USB mini B
type)
Connects the personal computer with GX Works2
installed and the CPU module.

External power supply —
Supplies power to the external I/O devices. Use the CE
marked models and be sure to perform grounding for
the FG terminal.
Tab. 2-2: Description of items in fig. 2-2




Switch (input) Programmable controller Lamp (output)