Specifications

Product specifications
Model Name
Drive system
Stroke (X×Y×X) [mm]
Rapid feedrate [m/min]
Processing feedrate [m/min]
Positioning accuracy [mm]
Repeat accuracy [mm]
Rated output [W]
ML3015eX
Flying optic (3-axis beam movement)
3100×1565×150
X,Y axes: Max. 100; Z-axis: Max. 65
Max. 50
0.05 / 500 (X,Y axes)
± 0.01 (X,Y axes)
4500
Laser Processing Machine CO
2
2-Dimensional Laser Processing Machine eX-Series
◎ Productivity has been dramatically enhanced owing to improved acceleration and the latest control technologies exclusive to Mitsubishi Electric.
◎ 2 Action Cutting allows for the entire process, from job setup to parts cutting, to be completed in two simple actions.
◎ When not processing, the system switches to ECO mode and the resonator stops idling. Minimizes energy consumption, reducing running costs by up to 99%
*1
during standby.
*1
: Compared to the previous LV-Series with Mitsubishi's designated benchmark shape.
A global standard CO
2
2-dimensional laser processing systems.
FA Products
Product specifications
Maximum number of control axes (NC axis + spindle + PLC axis)
Maximum number of part system
Maximum number of NC axes per part system
Maximum program capacity
Maximum number of files to store
Number of input/output points
Safety observation function
For detailed information, please refer to: http://www.mitsubishielectric.com/fa/worldwide/index.html
16 axes
Machining center system: 7 systems, Lathe system: 3 systems
8 axes
2,000 kB (5,120 m)
124 files/252 files
4,096 points
Safety signal comparison function, speed monitoring function, duplexed emergency stop
CNC Mitsubishi Numerical Control Unit C70 Series
◎A CNC structured in building block method on iQ Platform.
◎
High performance CNC integrated with high-speed PLC offers high-speed control to reduce cycle time.
◎A wide variety of FA products helps construct flexible lines.
iQ Platform compatible CNC to provide TCO reduction effect.
Product Specifications
Model
Machining travel (X×Y×Z)[mm]
Machining travel (U×V)[mm]
Max. taper angle [°]
Max. workpiece dimensions [mm]
Wire diameter [mm]
Dielectric fluid
Footprint (W×D)[mm]
(in)
(in)
(in)
(in)
(in)
※1：Φ0.2(0.08) DD guides and Φ1.5(0.06) jet nozzle are standard equipment.
MV1200R
400(15.7)×300(11.8)×220(8.7)(XY axis OPT-drive specifications)
±60(2.4)×±60(2.4)(OPT-drive specifications)
15° (maximum 200mm)(7.9")
810(31.9)×700(27.6)×215(8.5)
0.1(.004) to 0.3(.012)
※1
Water
2025(79.7)×2760(108.7)
EDM Wire EDM MV1200R
Next-generation Innovations of our best selling Performance Machine.
◎Total running cost reduced up to 42%, which is accounted for 90% by filter, ion exchange
resin and power consumption.
◎Improved productivity by an innovative automatic wire threading.
◎Faster machining is realized with improved power-supply performance.
（Rz3. 5μm/Ra0. 45μm with 3cuts）（Rz2. 0μm/Ra0. 28μm with 4cuts）
42