Specifications

Performance specifications
Item
Specifications
GT2712-STBA
GT2712-STBD
GT2712-STWA
GT2712-STWD
GT2710-STBA
GT2710-STBD
GT2710-VTBA
GT2710-VTBD
GT2710-VTWA
GT2710-VTWD
GT2708-STBA
GT2708-STBD
GT2708-VTBA
GT2708-VTBD
Display
section
✽
1
✽
2
Display device TFT color LCD
Screen size 12.1" 10.4" 8.4"
Resolution SVGA: 800×600 dots VGA: 640×480 dots SVGA: 800×600 dots VGA: 640×480 dots
Display size 246.0(9.685)(W)×184.5(7.264)(H) mm(inch) 211.2(8.315)(W)×158.4(6.236)(H) mm(inch) 170.9(6.728)(W) x 128.2(5.047)(H) mm(inch)
Number of characters
16-dot standard font: 50 chars. × 37 lines (2-byte)
12-dot standard font: 66 chars. × 50 lines (2-byte)
16-dot standard font: 40 chars. × 30 lines (2-byte)
12-dot standard font: 53 chars. × 40 lines (2-byte)
16-dot standard font:
50 chars. × 37 lines (2-byte)
12-dot standard font:
66 chars. × 50 lines (2-byte)
16-dot standard font:
40 chars. × 30 lines (2-byte)
12-dot standard font:
53 chars. × 40 lines (2-byte)
Display color
65536 colors
Intensity adjustment 32-level adjustment
Backlight LED (not replaceable)
Backlight life
✽
4
Approx. 60,000 hours or more (Time for display intensity reaches 50% at ambient temperature of 25°C)
Touch panel
✽
3
Type Analog resistive film
Key size Minimum 2 × 2 dots (per key)
Simultaneous press Maximum 2 points
Life 1 million times or more (operating force 0.98N or less)
Human
sensor
Detection distance 1m
–
Detection temperature Temperature difference between human body and ambient air: 4°C or higher
–
User memory
User memory
capacity
Memory for storage (ROM): 57MB
Memory for operation (RAM): 128MB
Life (No. of writings) 100,000 times
Internal clock accuracy ±90 sec/month (ambient temperature 25°C)
Battery
GT11-50BAT lithium battery
Life Approx. 5 years (ambient temperature 25°C)
Built-in
interface
RS-232 1ch Transmission speed: 115200/57600/38400/19200/9600/4800bps Connector shape: D-sub 9-pin (male)
RS-422/485 1ch Transmission speed: 115200/57600/38400/19200/9600/4800bps Connector shape: D-sub 9-pin (female)
Ethernet
1ch Data transfer method: 10BASE-T/100BASE-TX Connector shape: RJ-45 (modular jack)
USB (host)
2ch (front face/rear face) 1ch (rear face) 2ch (front face/rear face) 1ch (rear face) 2ch (front face/rear face)
Maximum transfer speed: High-Speed 480Mbps Connector shape: USB-A
USB (device)
1ch (front face) 1ch (rear face) 1ch (front face) 1ch (rear face) 1ch (front face)
Maximum transfer speed: High-Speed 480Mbps Connector shape: USB Mini-B
SD card 1ch SDHC compliant (maximum 32GB)
Extension interface For communication unit/option unit mounting
Auxiliary extension I/F For option unit mounting
Side interface For communication unit mounting
Buzzer output Single tone (tone, tone length adjustable)
POWER LED Emission color: 2 colors (blue, orange)
Protective structure Front: IP67F
✽
5
In control panel: IP2X
External dimensions
316(12.44)(W)×246(9.69)(H)×52(2.05)(D) mm(inch) 303(11.93)(W)×218(8.58)(H)×52(2.05)(D) mm(inch) 241(9.49)(W)×194(7.64)(H)×52(2.05)(D) mm(inch)
Panel cutting dimensions 302(11.89)(W)×228(8.98)(H) mm(inch) 289(11.38)(W)×200(7.87)(H) mm(inch) 227(8.94)(W)×176(6.93)(H) mm(inch)
Weight (excl. mounting brackets) 2.4kg 2.1kg 1.5kg
Compatible software package GT Designer3 Version1.105K or later
✽1 On LCD panels, bright dots (permanently lit) and black dots (never lit) generally appear. Because the number of display elements that exist on an LCD panel is large, it is not possible to reduce appearance of the
bright and black dots to zero. Individual differences in LCD panels may cause differences in color, uneven brightness and flickering. Note that these are characteristics of LCD panels and it does not mean the products
are defective or damaged.
✽2 Flickering may occur due to vibration or shock, or depending on the display colors.
✽3 The life of using a stylus pen is 100,000. Use a stylus pen meeting the following specifications.
• Material: Polyacetal resin • Pen point radius: 0.8mm or more
✽4 Using the GOT screen saver/backlight OFF functions prevents screen burn-in and extends backlight life.
✽5 Pressing "PUSH" mark firmly and locking the USB environmentally protective cover makes it conform to IP67F. (The USB interface conforms to IP2X when the cover is open.)
However, this does not guarantee protection in all users' environments. The unit may not be used in an environment where it is exposed to splashing oil or chemicals for a long time or it is soaked with oil mist.
Components names
q Display screen
w Touch panel
e
USB interface (host/front face)
✽
Excluding white model
r USB interface (device/front face)
✽
Excluding white model
t POWER LED
y
Human sensor (GT2712 only)
u Unit mounting bracket
i Reset switch
o S.
MODE switch
!0 SD card access LED
!1 SD card interface
!2 SD card cover
!3 Battery
!4 Side interface
!5
USB interface (host/rear face)
!6 Cable clamp mounting hole
!7
Terminating resistor setting switch
(inside the cover)
!8 Auxiliary extension I/F
!9 Extension interface
@0 Power supply terminal
@1 Ethernet interface
@2 RS-232 interface
@3 RS-422/485 interface
@4
USB interface (device/rear face)
✽
White model only
!0
GT2712
qw
t
@3
!9
i
!7!8
o
!1
!2
!3
!4
!5
@2 @1 @0
u u
u
y
u
e
r
@4
!6
!0
!1
!2
!3
!4
!5
!6
GT2710
@3 @2 @1 @0
u
u
!9
i
!8
!7
o
u u
@4
qw
t
e
r
GT2708
!0
!1!2!3
!7
!4
!5
@3 @2@1 @0
u
u
!9
i
!8
o
u u
qw
t
er
!6
Graphic Operation Terminal
29
Line up FA Solutions Specifications SupportProduct list
Features
Functions