Specifications

Data such as the programs and parameters of the programmable controller CPU, motion controller, robot controller
and CNC can be backed up onto the GOT’s SD card or USB memory. With a backup of data in the GOT, there’s no
need to use a personal computer when replacing the industrial devices such as the programmable controller CPU. All
replacement and restoration can be completed with just the GOT.
Memory
card, etc.
Sequence
programs,
etc.
Restore
Replace the CPU
If data is backed up
PLC
error!
PLC battery
is dead!
<Objective data> ……………… Programs, parameters, device comments, device default value data, file registers, etc.
<Objective
models > …………… MELSEC-Q Series (excluding Q12PRH/Q25PRHCPU), L Series, FX Series
Motion controller Q Series (SV13/SV22 only), CNC C70
Coming soon
Robot controller (CR750/751-Q, CR750/751-D, CRnQ-700, CRnD-700)
Coming soon
< Supported connection types > …… Bus connection, direct CPU connection, computer link connection, Ethernet connection
Back up multiple controllers at the same time
Multiple controllers connected on Ethernet can be backed up at the same
time, reducing the time needed to back up each controller separately.
Ethernet
Network No. 1
Station No. 1
Back up at the same time
Network No. 1
Station No. 2
Network No. 1
Station No. 3
Select and backup multiple
controllers
Automatic backup
Besides manual backup from touch switches, you can specify a
trigger device, a day of the week, and time for automatic backup.
Backup every Friday at 17:30
Backup
Friday 17:30
An Easy and Flexible HMI Solution
Easily backup and restore programs
Backup/Restore
GT27
Graphic Operation Terminal
16
Functions