Specifications

173
Transducers
Usage/Care/Storage/Request for
Usage
Install transducers in panels and use them as interface equipment for inputting DC signals corresponding to items measured
into various devices such as central monitor panels, data loggers and measuring equipment.
Transducers do not have any particular items requiring operation.
Care
During periodic maintenance that accompanies power interruption, use a soft cloth to wipe off the dust and debris that collects on
the surface of the transducer.
In the case of severe soiling, dip a cloth in a neutral detergent diluted with water, wring well, and then wipe the transducer surface.
Do not wipe using a chemically-treated dust cloth or cleanser such as benzene or thinner, otherwise discoloration or deformation of
the surface may occur.
Storage
Store transducers according to the following procedures. Removal work is to be performed by a person with proper technological
expertise in electric works.
Removing a transducer
Turn off the power to the circuits (input, auxiliary power) connected to the transducer. Confirm that no voltage is applied.
Use a screwdriver to loosen and remove the terminal screws of the transducer.
Perform the “Method for mounting” procedure on p.151 in reverse to remove the transducer.
1
Storage
For storage, refer to section on p.109.
8
2