Specifications

152
Transducers
Snap-fit terminal cover
 The terminal cover is fitted onto the partition walls of the
terminal section and can be easily removed.
The cover can also be removed by placing the tip of a
standard screwdriver into a slot along the side edge of the
terminal cover.
 To attach the terminal cover, simply push the cover back
into place.
 A nameplate can be inserted in the slot along the side
edge of the terminal cover to indicate a signal name or
equipment number.
The customer is requested to provide the nameplate.
Terminal
cover
Terminal cover
slot
Partition wall
Terminal cover
Nameplate
Slot
Power supply indicator (lamp)
An indicator (red LED) that shows current is being in
supplied from an auxiliary power supply is provided (except
for K Series).
Use this for daily inspection and as a guideline for judging
whether or not the device is operating.
Power supply
indicator (lamp)
Outer shape
T-51
T-101
For safety reasons, use an insulating material as the material of the nameplate.
Nameplate dimensions
t0.8~1✕7.5✕45
t0.8~1✕7.5✕95