Programming instructions

68
The dark gray area is the workspace where the ladder logic will appear. Most of
the toolbars that are open are but rarely used. These can be closed down to
make the workspace larger:
1) Under View, select Toolbar
2) Check Standard and LD symbol, and uncheck the rest
3) Under View find Project Data List
4) Deselect Project Data List until required.
11.2 Creating a New Project
1) Three ways to create a new project
• Under the Project menu, select New
• Press Ctrl-N
• Click the toolbar button for new document (blank white sheet of paper)
2) Select PLC series from dropdown menu. For this class select FXCPU.
3) Select PLC type from dropdown menu. For this class select FX3U(C).
4) If desired, a pathname and project name, as well as a short title can be
defined now. These do not need to be set at this point. This information can
be assigned when the project is saved later.
5) Press OK.
TOOLBARS
WORKSPACE
PROJECT DATA LIST