Programming instructions

Revisions

* The manual number is noted at the lower left corner of the front cover.

Print Date Manual Number Revision

12/8/00 Rev * - Created new manual, internal only

1/30/01 Rev A - First Release Manual

11/8/02 Rev B – Updated manual to reference GX-Developer instead

of GPP-WIN. Added Section 14.5 – Finding devices.

Expanded Section 15.1 to discuss how to download

comments. Corrected section 15.4 from Device Label to Alias

6/1/05 Rev C – Updated references to control products. Enhanced

project ladder in Appendix. Added new updated screen

captures.

2/25/06 Rev D – Updated to include FX3U. Section 2 removed

references to obsolete PLCs, updated to include FX3U and

new modules. Reordered Lessons 4 to 9. Lesson 8 now

based on FX3U PLC trainer. Expanded coverage of high

speed counter usage in Lesson 13.

3/24/06 Rev E – Corrected typos. Moved Lesson 2 power supplies to

after discussion of module types.

6/16/06 Rev F – Corrected Project 4 code in Appendix. Corrected

typos. Added programming exercises. Added basic ladder

logic section in Lesson 10. Added ALT to Lesson 10, TTMR

and HOUR to Lesson 12, RTC commands to Lesson 14.

Replaced BIN and BCD with FLT and INT in Lesson 13.

Added shift registers to Lesson 13.

Disclaimer: This manual does not imply guarantee or implementation right for industrial ownership or

implementation of other rights. Mitsubishi Electric Corporation is not responsible for industrial

ownership problems caused by use of the contents of this manual.