Programming instructions

102
Error Number 6705 is the error that appears in D8067. Step 4 is the step where
the error occurs and is stored in D8069. The message Operation Error refers to
Error Code 8067, which is stored in D8004.
3. Highlight the error by clicking on it
4. Click on the PLC Error in the Help section.
5. The following screen should appear:
This screen explains possible causes of the error state and possible solutions.
While divide by 0 isn’t explicitly stated here, it can be inferred from the references
to an incompatible device specification (the K0 as a divisor).
14.7 Find/Replace Menu
GX Developer provides several different
methods for locating devices or instructions.
The Find/Replace menu has a variety of tools
for searching or modifying programs. The find
options will search a program for an
occurrence of an address, function, or string.
The replace options will allow the replacing of
addresses, functions, open/closed contacts,
and other options. The cross reference and
used devices lists will show all occurrences of
an address in a program, or all used
addresses in the program.
Shown to the right is the list of options on the
Find/Replace menu.