User`s manual

–14–
HIGH POWER/ECONOMY operation procedure
2
Aim the remote control at the air-conditioner.
If the air-conditioner is not operating
Press the ON/OFF button.
Press the HI POWER/ECONO button.
When the operating mode is AUTO, COOL or HEAT
Each time the HI POWER/ECONO button is pressed, the indicator is switched
in the order of:
No indication
When the operating mode is DRY or PROGRAM TIMER
Each time the HI POWER/ECONO button is pressed, the indicator is switched
in the order of:
No indication
1
(
HIGH POWER
)(
ECONOMY
) (Normal operation)
(
ECONOMY
) (Normal operation)
Concerning
HIGH POWER
operation
Pressing the HI POWER/ECONO button intensifies the operating power and initiates powerful cooling or heating operation for 15 minutes
continuously. The remote controller
indicates but the FAN SPEED indication is erased.
During the HIGH POWER operation, the room temperature is not
controlled. When it causes an excessive cooling or heating,press
the HI POWER/ECONO button once more to cancel the HIGH
POWER operation.
HIGH POWER operation is not available during the dehumidify-
ing and the program timer operations.
During ON timer operation, HIGH POWER operation will start
when the ON time is reached.
When the following operations are conducted HIGH POWER op-
eration will be canceled.
1 When the HI POWER/ECONO button is pressed again.
2 When the operation mode is changed.
3 When it has been 15 min. since HIGH POWER operation
has started.
Concerning
ECONOMY
operation
Pressing the HI POWER/ECONO button intlates a soft operation with the power suppressed in order to avoid an excessive cooling or heating. The
unit operates 1.5°C higher than the setting temperature for weak wind capacity during cooling or 2.5°C lower than that during heating. The remote
controller
indicates but the FAN SPEED indication is eraseed.
NOTE
It will go into ECONOMY operation the next time the air-condi-
tioner runs in the following instances.
1
When the air-conditioner is stopped using the ON/OFF button.
2
When the air-conditioner is stopped in SLEEP or OFF
TIMER operation.
3 When CLEAN operation ends.
When the following operations are conducted ECONOMY opera-
tion will be canceled.
1 When the HI POWER/ECONO button is pressed again.
2 When the operation mode is changed dehumidifying to
fan.
NOTE
RKW012A202_En.p65 05.2.23, 11:2914