Specifications

4
High Efficiency
Our Latest Technologies
New propeller fan
The new propeller fan was
carefully matched with a fan
motor in order to keep the same
capacity as that of previous
models with less electrical
consumption. In synergy with
the leaf shape grill has seen an
improvement of energy efciency
by 5% and a decrease of sound
level.(SRC50/60ZIX-S)
Energy saving leaf shape grill
The leaf shape grill was developed in order to
maximize natural air ow sent by the propeller
fan along the grill. The airow is very smooth with
minimum air resistance. This has lead to a decreased
fan motor load and improvement of energy efciency.
ZAM steel sheet
ZAM steel sheet is used on the base of the
outdoor units. ZAM has superior corrosion
resistance and scratch resistance properties
compared to conventional materials.
1) ZAM is a registered trademark of Nissin
Steel Co., Ltd.
2) ZAM is a coined name applied to hot-
dipped zinc-aluminum-magnesium-alloy-
coated steel sheet developed by Nissin Steel
Co., Ltd.
Indoor unit
A combination of n conguration and
copper tube has enabled maximum air
ow whille keeping the same size width
of the indoor unit.
Efciency rate of heat exchanger has
been drastically improved by 30%
compared with previous models. The
new n design allows maximum air ow
and saving energy simultaneously.
Outdoor unit
Redesigned by changing the n
conguration from at sheet to new
M shape n, efciency has been
improved by 10%. An optimum
balance of heat transfer and air ow
has been achieved.
Silicon-coated PCB
The printed circuit board of the outdoor unit is
coated by silicon. The coating ensures longevity
of the board in humid conditions.
High efciency scroll
compressor. Low vibration
and low sound revel
photo is composite image
By using a scroll compressor there
has been an improvement of energy
efciency. Lower vibration and lower
sound level have been achieved.
Further improvement to efciency was
realized by use of a neodymium magnet
applied in the compressor motor.
(SRC50/60ZIX-S)