Manualshelf

Technical data

ManualsBrandsMitsubishi Heavy Industries ManualsAir ConditionerFDT208-A
12345678910
5
Installation of FDT Space Collar
For installation of FDT cassette in restricted height ceiling voids.
The SPACE COLLAR is used to provide a decorative enclosure
for the FDT cassette where the unit protrudes below the
level of the ceiling. This allows cassette units to be installed
where there is a restricted ceiling void.
The space collar is available in different heights, to allow
for the space available within the ceiling void. The collars
are precision moulded in glass fibre reinforced plastic,
colour textured to match the light grey cassette fascia
panel. The ceiling tiles can be installed resting on top of
the finished edge of the collar, leaving a neat finish to
the installation.
NOTE: It is important to make provision for the connection
of refrigerant piping and condensate drain, which may
be restricted where there is a minimal ceiling void.
The height of the space collar must be specified at the
time of ordering. The model reference of the FDT cassette
must also be specified.
The space collar height is to be specified by the installer.
The cut edge of the ceiling tiles can be concealed above
the top edge of the space collar to provide a neat finish